Horstmann C-Stat ZW Guide d'installation télécharger pdf (Page 11)

Procedure A

1. On the C-Stat programmable stat, Press ENTER twice

2. Press '-' or '+' to select SETUP

3. Press ENTER

4. Press '-' or '+' to select SET UP Z-WAVE

5. Press ENTER

6. This will now show the sub menu available for the Z-Wave

wireless communication settings

7. Select INCLUDE NODE / RECEIVER

8. Press ENTER

9. INCLUDING will appear under the INCLUDE NODE

heading.

10. Press and hold the network button on the ASR-ZW

Receiver until the flashing red light turns to a flashing green

light followed quickly by a solid red light

11. RECEIVER INCLUDED will now appear in the display of

the C-Stat. Press BACK and the antenna icon on the top left

had corner of the display will show it is active with radio

waves

12. The C-Stat and ASR-ZW Receiver are now 'paired'. The

Receiver should receive ON/OFF commands from the C-

Stat wirelessly.

Check this by turning the temperature on the C-Stat up and

down to see that the ASR-ZW receiver responds

accordingly with a green light for ON and a red light for OFF.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Horstmann C-Stat ZW Guide d'installation Page 11